Requires TM v11 and Firmware 9 or higher. For Sound, add Sound Module and set Sound Card to 2.Sound over HDMI / DP, use sound card 1, playback device 2, sound connector type HDMI / DP. 2x USB 2.0, 5x USB 3.0, 1x USB 3.1 Type C, 2x DP 1.2a, 1x Serial Port, 1x NIC, 1x 3.5mm audio out

Note: A physical reboot of the thin client may be required after making changes to the universal sound module.

Wyse 5070 N11D:
Universal Sound Module -- Sound Connector Type: DEFAULT; Sound Card Number: 2; Playback Device Number: AUTO

Wyse 5070 N12D:
Universal Sound Module -- Sound Connector Type: DEFAULT; Sound Card Number: 1; Playback Device Number: AUTO

Wyse5070 integrated speaker:
To double-check if there is an onboard speaker available with the Wyse5070 terminal, run Onboard Diagnostic Scan ( Press F5 key to run Onboard Diagnostics). In the end of the scan, a loud beep sound should be played from the integrated speaker.